No results were found for the filter!
Hint!
MTB brake discs in Punch design • Shimano compatible • heat treated • many small holes integrated in the braking surface • developed with Intend BC ➔ Available sizes are: Ø140, Ø160, Ø180, Ø190, Ø200, Ø203, Ø210, Ø220 mm Made from...
From €89.00 *
The disc shims / spacers centers the brake disc perfectly within the brake caliper. For different wheel-sets, this means you'll avoid brake drag after having swapped wheels (available in different thicknesses).
From €1.60 *
CNC machined Canti Studs / Brake Bosses for U-Brakes - suitable for BMX Bikes The internal thread of Canti Studs is M6. They are made of stainless steel. To reduce weight, the Canti Studs are drilled hollow. The Canti Studs are...
€12.00 * €13.90 *
Hint!
CNC machined Canti Studs / Brake Bosses / Brake Mounts for v-brake - suitable for Magura, Easton and Van Tuyl, optional with Replacement ring for all of our three piece brake bosses with 3 holes for the brake return spring. The internal...
From €9.95 *
CNC machined Canti Studs / Brake Bosses to fit the v-brake.The internal thread of the Canti Studs is M6. The bases are made of stainless steel and therefore corrosion-free and are easily replace the standard Studs. Compatibility - KLEIN...
From €11.90 *
The disc shim centers the brake disc perfectly within the brake caliper. For different wheel-sets, this means you'll avoid brake drag after having swapped wheels (available in different thicknesses).
From €2.20 *
Hint!
CNC machined Canti Studs / Brake Bosses to fit the v-brake, suitable for RockShox and Manitou Forks The internal thread to fit the v-brakes is M6. They are made of stainless steel and high strength Aluminium. To reduce weight, the...
From €10.40 *
Hint!
Brake Disc in hardened version, developed specifically for downhill use, Magura compatible, different thicknesses available Description optimal cooling by perforated braking area, developed for downhill use function optimized,...
From €49.00 *
Hint!
4-Hole Brake Disc in hardened version in XT Design for Rohloff Speehub, different Friction Ring width available, Shimano compatible, available sizes: Ø160 - Ø210mm Update 2019 Optimization of the design of the brake disc in the area of...
From €46.00 *
CNC machined canti studs, size M8 including a 3-hole spring plates for forks without counter holder for spring, as well suitable for CycleCross Forks This canti-stud kit is suitable for fork / frames without the locking pin of the...
€17.00 *
Replacement ring / Brake ring for all of our three piece brake bosses. It is laser from 1,5mm stainless stee, with 3-holes for the brake return spring. Compatibility: FA-M6 ➔ suitable for canti studs in size M6 M6 FA-M8 ➔ suitable for...
€7.50 *
CNC machined Canti Studs / Brake Bosses to fit the v-brake - suitable for Fox and Manitou Forks The internal thread to fit the v-brakes is M6. They are made of stainless steel and high strength Aluminium. To reduce weight, the Canti...
From €10.50 * €10.95 *
Die Ausgleichsspacer für IS Bremssattel als wichtiger Helfer bei der Montage an Rahmen und / oder Federgabel. Das Problem bei einer IS2000 Bremssattelausrichtung kennt wahrscheinlich jeder - die Fertigungstoleranzen sind teilweise zu...
€4.20 *
Torx steel screw set to mount the MTB Brake discs on the hub.
From €2.50 *
CNC machined Canti Studs / Brake Bosses to fit the v-brake - suitable for GT, Radon and Trek This Canti Studs are the most commonly used on rear brake. The internal thread of Canti Studs is M6. They are made of stainless steel and high...
From €9.95 *
Hint!
4-Hole Brake Disc in hardened version in RT Design for Coda Hubs, Shimano compatible, available sizes: Ø160 / Ø180mm Made from stainless steel which is hardened then ground flat, for a long lasting rotor with perfect trueness. Compatible...
From €42.00 *
Hint!
CNC machined Canti Studs / Brake Bosses Adaptor Kit to fit v-brakes - suitable for Marzocchi Forks The Canti-Pin / Canti-Pin Adapter Kit is required to run Marzocchi with rim brake (prerequisite of course, is that the fork and that are...
€26.50 * €29.00 *
Torx Titan Grade 5 screw set to mount the MTB Brake discs on the hub.
From €18.80 * €23.50 *
The disc shim centers the brake disc perfectly within the brake caliper. For different wheel-sets, this means you'll avoid brake drag after having swapped wheels (available in different thicknesses).
From €1.70 *
CNC machined Canti Studs / Brake Bosses to fit the v-brake - suitable for GT LTS and RST The internal thread to fit the v-brakes is M6. They are made of stainless steel and high strength Aluminium. To reduce weight, the Canti Studs are...
From €9.90 *
CNC machined Canti Studs / Brake Bosses to fit the v-brake - suitable for Z1 Wedge, Z2 X-Fly, Marzocchi Bomber Z3 M80 (Mg-Arch) The internal thread to fit the v-brakes is M6. They are made of stainless steel. To reduce weight, the...
€15.50 *
Hint!
Our new online configurator - the fastest way to your individual brake disc Configure individual brake discs online yourself - choose your size, select the desired design, enter the desired text and after a few seconds the screen will...
From €82.00 *
Hint!
Brake Disc in hardened version, developed specifically for downhill use, Magura compatible, different thicknesses available Update 2019 Further optimization of the braking surface and the inner area for receiving the brake disc on the...
From €55.00 *
CNC machined Canti Studs / Brake Bosses for Marzocchi models from 1997-2001 - suitable for Z1 Dual, Z1 Drop Off, Z1 MCR, Z3 and DH3 Canti Studs for all bomber forks 97-2001. Short boss suitable for forks with older style CNC / lattice...
€14.90 *
Hint!
6-Hole Disc Rotor in hardened version in XT Design, different Frictions Rings available Made from stainless steel which is hardened then ground flat, for a long lasting rotor with perfect trueness. Compatible with all major brake brands,...
From €44.00 *
CNC machined Canti Studs / Brake Bosses to fit the v-brake - suitable for SR Suntour, Surly and YETI A.R.C. The internal thread to fit the v-brakes is M6. They are made of stainless steel and high strength aluminium. To reduce weight,...
From €10.50 *
Befestigungsschrauben zur Montage von 4-Loch Bremsscheiben an alle Speedhub Naben Diese Schrauben dienen zur Befestigung der Bremsscheibe an die Nabe. Die Schrauben sollten mit einem Anzugdrehmoment von max. 7Nm befestigt werden...
€5.20 *
The disc shim centers the brake disc perfectly within the brake caliper. For different wheel-sets, this means you'll avoid brake drag after having swapped wheels (available in different thicknesses).
From €1.40 *
CNC machined canti studs, size M10x1 including a 3-hole spring plates for forks without counter holder for spring, as well suitable for CycleCross Forks This canti-stud kit is suitable for fork / frames without the locking pin of the...
€17.60 * €19.08 *
4-Hole Disc Rotor in hardened version in Wave Design for Coda Hubs, available sizes: 160 / 180 / 185mm Made from stainless steel which is hardened then ground flat, for a long lasting rotor with perfect trueness. Compatible with all...
From €42.00 *
4-Hole Disc Rotor in hardened version in RT Design for Rohloff Speehub • Shimano compatible • installed by Poison Bikes Germany ➔ Available sizes are: Ø160, Ø180, Ø200 und Ø203 mm Description complete brake pad 100% engaged (pad cleaning...
From €45.90 *
4-Hole Brake Disc in hardened version in SGB Design for Rohloff Speehub, Ashima and Magura MT5 / MT7 compatible, available sizes: Ø160 and Ø180 Description - optimal cooling by perforated braking area - function optimized, symmetrical...
From €40.00 * €43.00 *
Hint!
CNC machined canti studs, size M10x1,25 including a 3-hole spring plates for forks without counter holder for spring, as well suitable for CycleCross Forks This canti-stud kit is suitable for fork / frames without the locking pin of the...
€17.50 * €18.67 *
6-Hole Disc Rotor in hardened version in Uni Design, BionX IGH compatible Made from stainless steel which is hardened then ground flat, for a long lasting rotor with perfect trueness. Compatible with all major brake brands, just make...
From €46.00 *
6-Hole Disc Rotor in hardened version in Pin-Up Design Made from stainless steel which is hardened then ground flat, for a long lasting rotor with perfect trueness. Compatible with all major brake brands, just make sure the outer...
From €42.00 *
CNC machined Canti Studs / Brake Mounts for U-Brakes - suitable for BMX Bikes The internal thread of Canti Studs is M6. They are made of stainless steel. To reduce weight, the Canti Studs are drilled hollow. The Canti Studs are...
€12.50 * €13.90 *
Products from BrakeSTUFF
Viewed