Disc Rotor in Wave Design for Coda Hubs ✓ 4-Hole ✓ Magura compatible
Prices incl. VAT plus shipping costs
Delivery time 2-3 Workdays
Order number: CD140-WD
- Order number: CD140-WD
4-Hole Disc Rotor in hardened version in Wave Design for Coda Hubs, available sizes: Ø140 / Ø160 / Ø180mm
Made from stainless steel which is hardened then ground flat, for a long lasting rotor with perfect trueness. Compatible with all major brake brands, just make sure the outer diameter is correct and the correct caliper adaptor is fitted. A medium-hard to hard brake pad is recommended in order to achieve an optimum between pad wear and braking power (metallic or semi-metallic brake pad)
- Ø140mm = 104 g
- Ø160mm = 116 g
- Ø180mm = 131 g
Information for the heat treatment:
For additional stability and strength, all our disc brakes are heat treated. During this process, basic strength in addition to the resilient properties of the material can be improved. As a result, our discs have a very high level of strength, and visibly lower wear, which gives the discs a longer life! In addition, the risk of bending the disc is reduced, so your disc should stay straighter, longer!
These effects are only visible when the disc is installed correctly, and the brake is used properly.
|Rotor Size:||140 mm, 160mm, 180mm|
|Standard / Pitch Circle Diameter PCD:||4-hole for Coda hub (Ø44mm)|
|Material:||High alloy stainless steel ( AISI 420 C)|
|Surface treatment:||Heat treated and precision ground|
|Quantity:||1x Brake Disc incl. 4 steel bolts T25|
Endlich gefunden - Coda Bremsscheibe
Top Bremsscheibe!!! Passt perfekt an meine Magura Marta Bremse. Trotz des etwas höheren Preises sehr empfehlenswert.
Danke Johann für deine Bewertung :-)