Canti Studs M10x1,25 for V-Brakes, used mostly on rear brake, fitted on GT, Radeon and Trek
Prices incl. VAT plus shipping costs
Delivery time 1-2 Workdays
Order number: CS-M10x1.25-VA
- Order number: CS-M10x1.25-VA
CNC machined Canti Studs / Brake Bosses to fit the v-brake - suitable for GT, Radon and Trek
This Canti Studs are the most commonly used on rear brake.
The internal thread of Canti Studs is M6. They are made of stainless steel and high strength Aluminium. To reduce weight, the Canti Studs are drilled hollow. There are different thread engagement.
Compatibility
- Bianchi
- Cube Acid
- FAT Project SL
- GT: LTS, Zaskar
- Gudereit M60
- Mt. Fuji SL
- Trek (Rahmen)
- POISON Atropin
- Radon: ZR Litening, ZR Race, ZR Two
- Raleigh
- RST: M7-T, Neon
- Steppenwolf Timber
- Red Bull AL-400 Werks
Mounting
Before installing the Canti Socket, clean the hole and the bearing surface on the fork / frame properly and allow to dry. To attach, apply a few drops of bolt securement medium (eg Loctite 243) to the thread of the Canti Socket and then screw in with a torque between 5-6Nm.
Important: Before the first outing with the newly installed brakes wait 2-3h until the screw securing at the cantis base is almost completely hardened and safe.
Thread size: | M10x1.25 |
Mounting diameter: | Ø8mm (V-Brakes) |
Screw-in length: | 10,5mm |
Tightening Torque: | 5-6 Nm |
Material: | Stainless Steel / High-strength aluminum |
Quantity: | 1 Pair |
Durchaus Empfehlenswert
Produkt hat perfekt gepasst - nachdem ich beim zweiten Versuch die richtige Gewindesteigung bestellt hatte :-). Eine Bestellung hat die Post am Weg liegen lassen, Brakestuff hat prompt geantwortet und sich gleich darum gekümmert. Empfehlung