Disc Rotor in XT Design, 6-Hole, Shimano compatibel (different Frictions Rings available)
Prices incl. VAT plus shipping costs
usually ships in 12-15 working days
Order number: IS160-XT
- Order number: IS160-XT
6-Hole Disc Rotor in hardened version in XT Design, different Frictions Rings available
Made from stainless steel which is hardened then ground flat, for a long lasting rotor with perfect trueness. Compatible with all major brake brands, just make sure the outer diameter is correct and the correct caliper adaptor is fitted.
Revision of the design of the brake disc and the brake surface, arrangement of the holes optimized and additional recesses made so that the complete brake pad is 100% engaged. The topping is cleaned over the entire width of the friction ring. From 2020, the Ø160mm version will also be available in 2.10 and 2.20mm.
- Ø160 mm = 131 g
- Ø180 mm = 170 g
- Ø185 mm = 175 g
- Ø203 mm = 185 g
Information for the heat treatment:
For additional stability and strength, all our disc brakes are heat treated. During this process, basic strength in addition to the resilient properties of the material can be improved. As a result, our discs have a very high level of strength, and visibly lower wear, which gives the discs a longer life! In addition, the risk of bending the disc is reduced, so your disc should stay straighter, longer!
These effects are only visible when the disc is installed correctly, and the brake is used properly.
|Rotor Size:||160mm, 180mm, 185mm, 203mm|
|Standard / Pitch Circle Diameter PCD:||6-Hole (IS2000)|
|Material:||High alloy stainless steel ( AISI 420 C)|
|Surface treatment:||Heat treated and precision ground|
|Tightening Torque:||4-5 Nm|
|Braking Surface:||15mm, 18mm|
|Recommended Brake Pads:||Organisch / Semi-Organisch|
|Quantity:||1x Brake Disc incl. 6 steel bolts T25|